Effluent Water Evaporator Machine
- JOSTON
- WENZHOU, CHINA
- 35 DAYS
- 20 SETS/MONTH
This equipment is used for waste water treatment field to evaporate the water from the effluent water .
Effluent Water Evaporator Machine is suitable for waste water that is not suitable for biological , chemical or membrane treatment, such as high salt waste water, electroplating waste water, printing and dyeing waste water, garbage percolate, paper black liquid, flue gas desulfurization waste liquid, garbage incineration, gas recovery liquid, etc.; some high value-added production enterprise waste water has resources that need to be recovered, such as electronic industry, printed circuit board, precious metal recovery, film photocopying, etc. , this device is also available.
Effluent Water Evaporator Machine Structural features:
1. Effluent Water Evaporator Machine is composed of heater, evaporator, condenser, water collecting tank, defoamer, transfer pump, drainage pump, etc.
2. Effluent Water Evaporator Machine is made of anti-corrosion materials according to the characteristics of wastewater or sewage.
3. The waste water can meet the standard once or be used as the pretreatment measure of the subsequent process. Some of the waste water can be reused after evaporation to save the cost of tap water.
4. Vacuum decompression operation is adopted to increase the temperature difference of evaporation and increase the production capacity of evaporation intensity.
5. Multi effect evaporation is adopted, the secondary steam can be reused, with remarkable energy saving effect, convenient operation and simple installation.
6. Effluent Water Evaporator Machine structure is compact, the area of the station is small, and the configuration of each instrument valve is reasonable and convenient for operation.
7.Effluent Water Evaporator Machinematerial can be used, SS304 ,SS316L ,SS2205 ,Titanium,MS etc. material
8.evaporation water capacity can reach 0.5t/h ~ 10t / h.
9.Effluent Water Evaporator Machine can run automatically through PLC control and can run continuously and stably for a long time.
10.The cleaning cycle depends on the actual situation. Materials with high hardness need to be pretreated or the cleaning cycle should be shortened. The main equipment shall be equipped with cleaning nozzles. The cleaning solution can be clean water or dilute acid according to the actual situation.
